|
CLICK ON PHOTO TO VIEW ENLARGED COPY |
|
Tools & Accessories Necessary |
| 1.) Phillips head screwdriver |
| 2.) Drill |
| 3.) Drill bit (size 1/8 inch) |
| 4.) Working gloves & protective Eye wear |
| 5.) Phillips screws included with kit |
| |
| INSTALLATION |
| CAUTION: Please do not remove protective vinyl until
Fender Trims are installed. |
| Step #1: Determine proper position of fender
trim moldings. |
| Step #2: Hold in position and make sure
Fender Trim is secured tight against wheel well. |
| Step #3: Drill hole and mount screws in
position. |
| Step #4: If Fender Trim has middle hole,
start from middle hole and work down either side. |
| Step #5: Remove protective vinyl and view the
high polish finish of your Fender Trim molding. |
| |
| Cleaning & Maintenance Instructions |
| Clean your Fender Trims using a soft cloth, water & Soap. |
| CAUTION: Do not use any abrasive material or
any kind of polish. |
| |
| NOTE: |
| If you have any installation problems, please call us.
1-800-231-7765 |
| |
|
PRICES SUBJECT TO CHANGE
WITHOUT NOTICE, ALL ITEMS SHIPPED FOB ORIGIN.
COPY RIGHT © 1985 - 2005 GOLD PLATED EMBLEMS & AUTO
ACCESSORIES, INC. ALL RIGHTS RESERVED
THIS WEB SITE DESIGNED AND MAINTAINED BY: NICK GOVSYEYEV. SEND
COMMENTS TO:
webmaster@goldplated.com
UPDATED:
03/28/2005
|
