|
|||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
| |||||||||||||||||||||||||
|
3-Step
Installation
System
1.
We
exclusively
use
premium
3M
Primer-less
adhesive,
so
you
skip
the
tedious
and
time
consuming
step
of
applying
promoter
to
every
part
before
installation.
2.
Our
parts
ship
to
you
with
the
adhesive
liner
already
removed,
so
all
you
do
is
lift
&
stick,
as
opposed
to
taking
the
time
to remove
the
liner
off
each
part
individually.
3.
During
final
fitting,
you
can
easily
reposition
parts
for
a
perfect
fit,
an
advantage
you
don't
have
when
installing
pieces
onto
factory
parts
that
have
been
prepared
with
promoter.
For
the
best
results,
the
temperature
of
the
dash
and
the
dash
pieces
should
be
approximately
70�F
(21�C).
In
colder
conditions,
use
a
heat
gun
or
hair
dryer
to
warm
part
surfaces
to
the
ideal
temperature.
Caution!
Factory part
surface
MUST be
completely
dry and free
of
contaminants
for your
dash kit to
adhere
properly!
Use the
alcohol pads
included in
your kit to
wipe all
surfaces
clean. In
many cases,
you may need
to repeat
this step
more than
once.
STEP: 2
LIFT PART
FROM BOX
Identify the
location on
the dash
where each
piece in
your kit is
to be
applied. In
preparation
for the
installation
of each
piece,
simply lift
it off the
packing
board.
Starting
with any of
the larger
pieces and
beginning
from any
edge, apply
the piece
onto the
dash.
If the piece
is not
positioned
properly,
simply lift
it up and
reinstall to
achieve the
desired fit. PRICES SUBJECT TO CHANGE
WITHOUT NOTICE, ALL ITEMS SHIPPED FOB ORIGIN. UPDATED:
05/06/2008
| |||||||||||||||||||||||||
